Licensed Electrical Wiring
Wiring engineered to be safe first, invisible second
Full home rewiring, new-construction wiring, panel upgrades, and smart-home circuits — installed to code across Rawalpindi and Islamabad, with every circuit tested before handover.
0+
Properties wired
0+
Years of electrical work
0%
Circuits tested per job
0 years
Workmanship warranty
Wiring is the one part of a home nobody sees and everybody depends on. Our electricians plan every circuit before a single wire is pulled, use proper conduit and concealed routing, and test each point before we consider a job finished. Whether it's a full rewire of an older Saddar-area home or ground-up wiring for new construction in Bahria Town, we work to the same standard: safe, documented, and built to handle Pakistan's voltage fluctuations and generator/UPS switching.
The Work
Wiring projects in progress
What’s Included
Every type, one team
Complete Home Rewiring
Replacing outdated, brittle, or unsafe wiring in older homes across Rawalpindi and Islamabad with modern concealed circuits and updated distribution boards.
New Construction Electrical Wiring
Ground-up wiring planned alongside your architect's layout, from the DB room to every switch, socket, and light point — coordinated with ceiling and interior teams.
Distribution Board (DB) & Breaker Panel Upgrade
Upgrading old fuse boxes to modern MCB/RCD distribution boards for better protection against overloads and short circuits.
Concealed Wiring & Conduit Installation
Clean, chased-in-wall wiring using proper PVC conduit — no exposed cabling — for a tidy finish that also protects wires from damage during renovation.
Lighting Circuits & Switch/Socket Installation
Dedicated circuits for lighting, general sockets, and kitchen appliances, with switch and socket placement planned around your furniture layout.
Ceiling Fan & Chandelier Wiring
Reinforced ceiling points rated for fan load and heavier chandeliers, wired in coordination with our ceiling installation team.
Generator, UPS & Solar Changeover Wiring
Automatic and manual changeover wiring so your generator, UPS, or solar inverter kicks in cleanly during Rawalpindi and Islamabad's load-shedding hours.
Earthing & Surge Protection
Proper earthing installation and surge protection devices to protect appliances and reduce shock risk — often missing in older properties.
Electrical Safety Inspection & Fault-Finding
Full-property inspection to trace tripping breakers, flickering lights, warm switches, or burning smells before they become a fire risk.
Smart Home & Automation Wiring
Structured wiring for smart switches, app-controlled lighting, and automation panels — planned in from the start for new builds and renovations in Islamabad.
Our Process
How a project runs
- 01
Free electrical inspection
We assess your current wiring or new-construction layout, check load requirements, and flag any safety issues on-site.
- 02
Circuit planning & load calculation
We map every circuit — lighting, sockets, kitchen, AC, fans — and size the distribution board and cabling to match actual load, not guesswork.
- 03
Conduit routing & wire pulling
Conduit is chased into walls or ceilings before finishing work begins, keeping every wire protected and out of sight.
- 04
Fittings, DB installation & testing
Switches, sockets, and the distribution board are installed and every circuit is load-tested individually before handover.
- 05
Safety sign-off & documentation
You receive a simple circuit map and safety checklist for your records — useful for future renovations or maintenance.
Service Areas
Wiring across Rawalpindi, Islamabad & beyond
Our crews are based in Rawalpindi and work across Islamabad daily. We also travel for projects in Murree, Taxila, Wah Cantt, Rawat, Kahuta, and Kotli Sattian.
Rawalpindi
Our home base — from Bahria Town to Saddar, same-week site visits.
Islamabad
Serving every sector from E-11 to G-13 and beyond with senior crews.
Murree
Weather-resistant ceiling and wiring builds for hillside homes.
Taxila
Residential and industrial wiring for Taxila's growing housing schemes.
Wah Cantt
Trusted by cantonment families for tidy, code-compliant wiring.
Rawat
Fast turnarounds for new-construction wiring and ceilings on the GT Road corridor.
Kahuta
Interior design and ceiling teams that travel out for full-home projects.
Kotli Sattian
Reliable rewiring and ceiling repair for Kotli Sattian's homes and guest houses.
Common Questions
Wiring FAQs
Warning signs include frequently tripping breakers, warm or discolored switch plates, flickering lights, a burning smell, or wiring older than 20–25 years. A free inspection will confirm whether you need a full rewire or targeted repairs.
Yes — for the best result, wiring for lighting and fan points should be roughed in before ceiling panels go up. We coordinate scheduling with our ceiling team so both trades work in the right order.
Yes, we install manual and automatic changeover systems so your backup power switches over safely during load-shedding, without back-feeding the grid.
Yes, all wiring installations carry a workmanship warranty, and we use certified cable and DB components rated for the load they'll carry.
We regularly wire homes and small commercial units in Murree, Taxila, Wah Cantt, Rawat, Kahuta, and Kotli Sattian in addition to Rawalpindi and Islamabad.
Wiring ideas from the journal
All articlesComplete Home Rewiring Guide for Older Houses in Saddar Rawalpindi
A practical guide to full home rewiring for older houses in Saddar Rawalpindi — warning signs, what the process involves, and how long it takes.
4 min readwiringNew Construction Wiring Checklist for Bahria Town Rawalpindi Homes
A practical wiring checklist for new-build homes in Bahria Town Rawalpindi — circuit planning, DB sizing, conduit routing, and what to confirm before walls close up.
6 min readwiringDistribution Board & Breaker Panel Upgrades in Islamabad
When and why to upgrade an old fuse box to a modern MCB/RCD distribution board in Islamabad homes, and what the upgrade process involves.
5 min read